|

|
Amgrow
Pty Ltd
ABN 22 069 900 456
PO Box 1085,
Penrith 2751
1800 682 221
|
MATERIAL SAFETY DATA SHEET
Not classified as hazardous according to the criteria of Worksafe Australia.
l IDENTIFICATION
Product Name:
Garden
Essentials Superphosphate
Other Names: None.
Product Code: None.
UN No: None allocated Hazchem Code: None allocated
Dangerous Goods Class: None allocated
Sub Risk Class: None allocated
Packaging Group: None allocated
Poison Schedule: Not scheduled.
Chemical Family: Inorganic salt.
Uses: Domestic fertiliser.
Physical Appearance & Properties
Appearance & Odour: Grey brown
solid. Mild acid odour
Melting/softening point: No specific data. Solid at normal temperatures.
Boiling point and vapour pressure: N/A
Volatile materials: N/A
Flashpoint: Does not burn.
Specific gravity: 1.1
Solubility in water: Soluble.
Corrosiveness: Not corrosive.
Ingredients
| Chemical Entity |
CAS No |
Proportion % |
Worksafe Exposure Limits TWA
mg/m3 STEL mg/m3 |
| Calcium Phosphate |
8011-76-5 |
pure* |
not
set
not set
|
* Commercially pure.
This is a commercial product whose exact ratio of components may vary. Trace
quantities of impurities are also likely.
___________________________________________________________________________________________________________________
ll HEALTH HAZARD DATA
Health Effects:
Not classified as hazardous according to
criteria of Worksafe Australia. No specific data is available for the product
for chronic exposure symptoms. The ingredients are not listed as carcinogenic in
Worksafe’s document "Exposure Standards for Atmospheric Contaminants in
the Occupational Environment" (May 1995).
Acute Effects:
Swallowed: Swallowing very large
amounts may cause diarrhoea, nausea, vomiting and abdominal pain
Eyes: This product is mildly irritating to the eyes. It is likely to
cause mild discomfort such as watering and redness of the eyes.
Skin: Mildly irritating to skin. Frequent or prolonged contact may cause
dermatitis. No effects should occur if promptly washed off skin.
Inhalation: Inhalation of airborne dust may cause irritation to nose and
throat
First Aid:
If poisoning occurs, contact a Doctor or Poisons Information
Centre.
Swallowed: Rinse mouth and give
plenty of water to drink. If vomiting occurs give further water, seek medical
advice
Eyes: If product gets in eyes, wash material from them with running water
for 15 minutes. Seek medical advice
Skin: If product gets on skin, wash skin to remove material. No further
measures should normally be required.
Inhalation: No
first aid measures normally required. However, if vapours or mists have been
inhaled, and irritation has developed, remove to fresh air and observe until
recovered. If irritation becomes painful or persists more than about 30 minutes,
seek medical advice.
Advice to Doctor: Treat symptomatically. Note the nature of this product
____________________________________________________________________________________________________________________
lll PRECAUTIONS FOR USE
Exposure Standards:
A time weighted average (TWA)
concentration for an 8 hour day, and 5 day week has not been established by
Worksafe Australia for any of the major ingredients in this product. There is a
blanket limit of 10mg/m3 for dusts or mists when limits have not
otherwise been established. The nature of this product makes it unlikely that
this level will be approached in normal use.
Engineering Controls:
No special ventilation required.
In
industrial situations, concentration values below the TWA value should be
maintained. Values may be reduced by process modification, use of local exhaust
ventilation, capturing substances at the source, or other methods. If you
believe air borne concentrations of mists, dusts or vapours are high, you are
advised to modify the process or environment to reduce the problem.
Personal Protection:
Respiratory Protection: It is
usually safe to not use a dust mask or respirator protection on account of this
product. However, if the product is being used in dusty or confined conditions,
use of a mask or respirator may be preferred. For help in selecting suitable
equipment, consult AS/NZS 1715.
Protective Gloves: Protective gloves are not normally necessary when
using this product. However, it is always prudent to wear gloves. For help in
selecting suitable equipment, consult AS 2161.
Eye Protection: Protective eyewear is suggested when using this product.
It is always prudent to use protective eyewear. Consult AS1336 and AS/NZS 1337
for advice on Industrial Eye Protection.
Clothing: This product is essentially safe to use without special
protective clothing. However, its use is recommended as a good industrial
practice. Consult AS2919 for advice on Industrial Clothing.
Safety Boots: Wearing safety boots in industrial situations is advisory.
Consult AS/NZS2210 for advice on Occupational Protective Footwear.
Always wash hands before smoking, eating or using the toilet. Wash contaminated
clothing and other protective equipment before storing or re-using.
____________________________________________________________________________________________________________________
lV SAFE HANDLING INFORMATION
Storage & Transport
No special storage and transport
requirements. This product has no UN classification. Not a Scheduled Poison.
Containers should be kept closed in order to minimise contamination. Keep from
extreme heat and open flames, and make sure that the product does not come into
contact with substances listed under "Materials to avoid" below. Store
away from farm chemicals, eg insecticides, fungicides and pesticides
Spills & Disposals
Minor spills do not normally need any
special cleanup measures. In the event of a major spill, prevent spillage from
entering drains or water courses. As a minimum, wear overalls, goggles and
gloves. Stop leak if safe to do so, and contain spill. Absorb onto sand,
vermiculite or other suitable absorbent material. Sweep up and shovel or collect
recoverable product into labelled containers for recycling or salvage. Recycle
containers wherever possible. After spills, wash area preventing runoff from
entering drains. If a significant quantity of material enters drains, advise
emergency services. This material may be suitable for approved landfill. Dispose
of only in accord with all regulations.
Fire & Explosion Hazard
There is no risk of an explosion from
this product under normal circumstances if it is involved in a fire.
Flashpoint: Does not burn.
Flammability limits: Not applicable. This product does not burn.
Extinguishing Media: This product does not burn. Use extinguishing media
suited to the materials that are burning.
Special Fire Fighting procedures: When fighting fires involving
significant quantities of this product, wear safety boots, non-flammable
overalls, gloves, hat and preferably, goggles.
Unusual Fire & Explosion Hazards: Fire decomposition products from
this product may form toxic and corrosive mixtures in confined spaces.
Stability: This product is unlikely to spontaneously decompose.
Polymerisation: This product is unlikely to spontaneously polymerise.
Decomposition Products: Decomposes on heating, emitting toxic fumes
Materials to avoid: No particular incompatibilities. Keep dry as material
is hygroscopic and moisture causes caking
_______________________________________________________________________________________________________________
V OTHER INFORMATION
This MSDS is prepared in accord with the
Worksafe Australia document "National Code of Practice for the Preparation
of Material Safety Data Sheets", 1994. File Code: superph.kng
| Contact Points: |
AUSTRALIA |
| Police and Fire Brigade: |
Dial 000 |
| If ineffective: |
Dial 1100 (Exchange) |
| National Poisons
Information Centre: |
Dial 13 1126 (from
anywhere in Australia) |
THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD
INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE
WORKPLACE. EACH USER SHOULD READ THIS MSDS AND CONSIDER THE INFORMATION IN THE
CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE INCLUDING
IN CONJUNCTION WITH OTHER PRODUCTS. IF CLARIFICATION OR FURTHER INFORMATION IS
NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER
SHOULD CONTACT THIS COMPANY. THE RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO
OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND
IS ALSO AVAILABLE ON REQUEST.
Please read all labels carefully before using product.
This MSDS prepared by Kilford & Kilford Pty Ltd May, 2004.
revised 30th July 2007
Copyright © Kilford & Kilford Pty Ltd, 1998 Phone (02)9251 4532