Envirogreen Pty Ltd    
ABN 22 069 900 456

PO Box 1085, Penrith 2751
1800 682 221

MATERIAL SAFETY DATA SHEET

Not classified as hazardous according to the criteria of Worksafe Australia.

l IDENTIFICATION

Product Name: Garden Essentials Sulphate of Ammonia
Other Names: None.
Product Code: None.
UN No: None allocated Hazchem Code: None allocated
Dangerous Goods Class: None allocated
Sub Risk Class: None allocated
Packaging Group: None allocated
Poison Schedule: Not scheduled.
Chemical Family: Inorganic salt.
Uses: Domestic fertiliser.

Physical Appearance & Properties
Appearance & Odour: Fine white granulated solid. No odour.
Melting/softening point: No specific data. Solid at normal temperatures.
Boiling point and vapour pressure: Decomposes before boiling at 100kPa.
Volatile materials: No specific data. Expected to be low at 100°C.
Flashpoint: Does not burn.
Specific gravity: 1.77
Solubility in water: Soluble.
Corrosiveness: Not corrosive.

Ingredients

Chemical Entity CAS No Proportion % Worksafe Exposure Limits
TWA mg/m3          STEL mg/m3
Ammonium Sulphate 7783-20-2 pure* not set                        not set

* Commercially pure.
This is a commercial product whose exact ratio of components may vary. Trace quantities of impurities are also likely.

___________________________________________________________________________________________________________________

ll HEALTH HAZARD DATA

Health Effects:
No specific data is available for the product for chronic exposure symptoms. The ingredients are not listed as carcinogenic in Worksafe’s document "Exposure Standards for Atmospheric Contaminants in the Occupational Environment" (May 1995).

Acute Effects:
Swallowed: Data suggests that this product should present no significant problems to typical persons if used as intended.
Eye: This product is mildly irritating to the eyes. It is likely to cause mild discomfort such as watering and redness of the eyes. However, this should quickly disappear once exposure is over.
Skin: Data suggests that this product should present no significant problems to typical persons if used as intended.
Inhalation: Data suggests that this product should present no significant problems to typical persons if used as intended.

First Aid:
If poisoning occurs, contact a Doctor or Poisons Information Centre.
If swallowed, do NOT induce vomiting. Give a glass of water.
Eyes: If product gets in eyes, wash material from them with running water. If they begin watering or reddening, take special care in washing thoroughly.
Skin: If product gets on skin, wash skin to remove material. No further measures should normally be required.
I
nhalation: No first aid measures normally required. However, if vapours or mists have been inhaled, and irritation has developed, remove to fresh air and observe until recovered. If irritation becomes painful or persists more than about 30 minutes, seek medical advice.
Advice to Doctor: Treat symptomatically. Note the nature of this product

____________________________________________________________________________________________________________________

lll PRECAUTIONS FOR USE

Exposure Standards:
A time weighted average (TWA) concentration for an 8 hour day, and 5 day week has not been established by Worksafe Australia for any of the major ingredients in this product. There is a blanket limit of 10mg/m3 for dusts or mists when limits have not otherwise been established. The nature of this product makes it unlikely that this level will be approached in normal use.

Engineering Controls:
In industrial situations, concentration values below the TWA value should be maintained. Values may be reduced by process modification, use of local exhaust ventilation, capturing substances at the source, or other methods. If you believe air borne concentrations of mists, dusts or vapours are high, you are advised to modify the process or environment to reduce the problem.

Personal Protection:
Respiratory Protection: It is usually safe to not use a dust mask or respirator protection on account of this product. However, if the product is being used in dusty or confined conditions, use of a mask or respirator may be preferred. For help in selecting suitable equipment, consult AS/NZS 1715.
Protective Gloves: Protective gloves are not normally necessary when using this product. However, it is always prudent to wear gloves. For help in selecting suitable equipment, consult AS 2161.
Eye Protection: Protective eyewear is suggested when using this product. It is always prudent to use protective eyewear. Consult AS1336 and AS/NZS 1337 for advice on Industrial Eye Protection.
Clothing: This product is essentially safe to use without special protective clothing. However, its use is recommended as a good industrial practice. Consult AS2919 for advice on Industrial Clothing.
Safety Boots: Wearing safety boots in industrial situations is advisory. Consult AS/NZS2210 for advice on Occupational Protective Footwear.
Always wash hands before smoking, eating or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.

____________________________________________________________________________________________________________________

lV SAFE HANDLING INFORMATION

Storage & Transport
No special storage and transport requirements. This product has no UN classification. Not a Scheduled Poison. Containers should be kept closed in order to minimise contamination. Keep from extreme heat and open flames, and make sure that the product does not come into contact with substances listed under "Materials to avoid" below.

Spills & Disposals
Minor spills do not normally need any special cleanup measures. In the event of a major spill, prevent spillage from entering drains or water courses. As a minimum, wear overalls, goggles and gloves. Stop leak if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage. Recycle containers wherever possible. After spills, wash area preventing runoff from entering drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for approved landfill. Dispose of only in accord with all regulations.

Fire & Explosion Hazard
There is no risk of an explosion from this product under normal circumstances if it is involved in a fire.
Flashpoint: Does not burn.
Flammability limits: Not applicable. This product does not burn.
Extinguishing Media: This product does not burn. Use extinguishing media suited to the materials that are burning.
Special Fire Fighting procedures: When fighting fires involving significant quantities of this product, wear safety boots, non-flammable overalls, gloves, hat and preferably, goggles.
Unusual Fire & Explosion Hazards: Fire decomposition products from this product may form toxic and corrosive mixtures in confined spaces.
Stability: This product is unlikely to spontaneously decompose.
Polymerisation: This product is unlikely to spontaneously polymerise.
Decomposition Products: Nitrogen, and under some circumstances, oxides of nitrogen. Oxides of sulfur. Water.
Materials to avoid: No particular incompatibilities.

_______________________________________________________________________________________________________________-

V OTHER INFORMATION
This MSDS is prepared in accord with the Worksafe Australia document "National Code of Practice for the Preparation of Material Safety Data Sheets", 1994. File Code: AmmoniaSulfate.kng

Contact Points: AUSTRALIA
Police and Fire Brigade: Dial 000
If ineffective: Dial 1100 (Exchange)
National Poisons Information Centre: Dial 13 1126 (from anywhere in Australia)

THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER SHOULD READ THIS MSDS AND CONSIDER THE INFORMATION IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE INCLUDING IN CONJUNCTION WITH OTHER PRODUCTS. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY. THE RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product.

This MSDS prepared by Kilford & Kilford Pty Ltd May, 1998.
This revision issued July 2007
Copyright © Kilford & Kilford Pty Ltd, 1998 Phone (02)9251 4532